check these scans out, not good :( **update**

Posted: Sun Oct 09, 2005 9:48 pm Post subject:

What fuse do you pull to disable he tcs totaly? O ne of the maxi fuses right? Probably going to try to pull it when I'm at the track this week to see if it makes a difference.

Posted: Sun Oct 09, 2005 11:33 pm Post subject:

I've heard about doing that. I did it to brains 04 on the dyno.

The fuse marked TCC. the the touqre convertor. LOL don't pull that. O belive it's the magnasteer, and AC also on the TCS fuse.

But I've never pulled any fuses form my cat dyno, track,street.

edit link sucka

http://www.oqcgp.com/upgrades/tcs_off/tcs_off.php
_________________
New Era performance

01z28, M6 NA, mullet, T tops, siqqqq

Posted: Sun Oct 09, 2005 11:37 pm Post subject:

That's what I heard. IDK

Posted: Sun Oct 09, 2005 11:53 pm Post subject:

On my PCM, I have the tracion contraol shit off tho. So stock you migght wnat to try it

Posted: Mon Oct 10, 2005 1:04 pm Post subject:

I've got a DHP v1.0

Posted: Mon Oct 10, 2005 1:49 pm Post subject:

Posted: Mon Oct 10, 2005 2:54 pm Post subject:

I'll have to give it a try this friday at the track if it don't rain.

Posted: Sun Oct 16, 2005 9:27 am Post subject:

I've got another scan of my car. Take a look and see what you guys think. Definitly better than it was i guess.......

http://www.amoxsoft.com/mike/new2/view.php?scanName=nanny+log+10%2F15%2F05&display=Display+Scan&member_view=monte0

Posted: Sun Oct 16, 2005 11:24 am Post subject:

?????

Posted: Sun Oct 16, 2005 8:19 pm Post subject:

Anyone?

Posted: Mon Oct 17, 2005 1:11 am Post subject:

get your FT not to lock at 7

I'd run a .930-.940

save the .910 for race gas, or a IC setup

Posted: Mon Oct 17, 2005 9:31 am Post subject:

Posted: Mon Oct 17, 2005 12:24 pm Post subject:

When you go WOT, your LTFT lock in at whatever they were immediately before WOT. So if you have your car tuned so that the LTFT are 0 at idle and then tune for 0 at cruise speeds (between idle and WOT MAFF ranges) then they will be near 0 when you go WOT.

You have to use a mini-AFC or PCM tuner to do that.

Posted: Wed Oct 26, 2005 1:46 am Post subject:

I'll be getting my new pcm soon so I'll be posting some new scans up soon I hope (cross my fingers this works!!) Pulled a little timing out and lowered my shift points from 6,300 to 6,000. Maybe that will reduce some of my boost stacking hopefully.

	Upstate New York Club Grand Prix Forum Index -> PCM / Tuning	All times are GMT - 5 Hours Goto page Previous 1, 2
Page 2 of 2