Aeroforce takes down another 2k gtp...

Around 11:30pm i find my car to start and die but w/ out the security light on at all. it comes on when i turn it to run, it goes off, i start, it dies and i never c the light again. i try pulling the passkey fuse, resetting the pcm through the battery and nothing. any ideas? or am i stuck trying to get the half hour key programming to work?(also tried 2 different keys)
_________________
2004 Yukon XL Trying to keep stock
2000 gtp Custom I/C, TOGs, Custom PCM, 3.25'', HAI, VS cam Retired

Posted: Sat Mar 04, 2006 11:18 pm Post subject:

Is that the aeroforce scan guage?
Does it commonly cause problems on GTP's?

Posted: Sun Mar 05, 2006 12:25 am Post subject:

just the 00-01's. my problem turned out to be the fuel pump resistor after all. But i think the gauge fried my passkey3 bypass for my remote starter cuz that no longer works and gives me the security light.

Posted: Sun Mar 05, 2006 8:13 am Post subject:

but your car started after all right? and wasn't because of a key reprograming issue? I returned my scan gauge because of the key reprograming on my 01 GTP however they suggested if I left it plugged in and did the key relearn with it plugged in then i probably wouldn't have any future problems.
_________________
Adam
Formerly, 2001 GTP (5-15-09)
Currently, 2009 Twin Turbo BMW 135i Shocked

Posted: Tue Mar 07, 2006 5:20 pm Post subject:

you wouldnt be looking to sell yours would you?

	Upstate New York Club Grand Prix Forum Index -> PCM / Tuning	All times are GMT - 5 Hours
Page 1 of 1