FS/ 1.9 rockers *sold** update with info on da car*

Last edited by studderin on Sun May 23, 2004 9:11 pm; edited 2 times in total

Intense gen1 1.9 rockers;
On my car only 1 yr. about 6K miles on them. Come with the guild plates for them. I don't need a core. I lost about 2 tenth and gained 3 MPH with them.
Looking for $200, can be installed for $50

SOLD

Posted: Mon Apr 05, 2004 8:25 am Post subject:

Can I get a look at those guide plates (pedestals I assume) so I can see how far I have to notch my stock ones for my new rockers?

Posted: Tue Apr 20, 2004 10:06 am Post subject:

John did you sell these?
I gotta check the treasury after buying supplies for Mod Day but I think 1.9s are my next mod. It's either that or I slap the 3.8 back on.
_________________
1998 Silvermist GTP Coupe
Bone stock unicorn
1998 True Green Metallic GTP Coupe
Pullied, cammed, intercooled. With a kiddie seat. It once ran a 13 flat.
1998 True Green Metallic GTP Sedan (retired)
Stock: 14.33 @ 96.5
PB: 13.89 @ 101 mph

Posted: Tue Apr 20, 2004 2:03 pm Post subject:

john, u will install these for $50?? if so i might take u up on that..
_________________
MODS: Stock

Posted: Tue Apr 20, 2004 4:54 pm Post subject:

still for sale.

On your car for $250 works. If your cars stock, I'd recomend getting new vavle cover gaskets, Most cars with 50K+ leak.
And get new rocker bolts. Thats a must with orj. ones.
If you get the parts for mod day I might beable to put them on then.
I think I even have 12 new rocker bolts? I have a few kickin around.

Posted: Tue Apr 20, 2004 5:10 pm Post subject:

do u know the part # on hand for the gasket...ill have to see what i get paid on thurs...it might be a go

Posted: Tue Apr 20, 2004 9:17 pm Post subject:

Um, Johnny who you talking to? Me or junior?
Eh, I got my hands full already with the ported manifold. Have at it.

Posted: Sat May 01, 2004 12:02 pm Post subject:

TTT
Gasket

24503937 gmpartsdirect.com 6.43
Valve Cover Gaskets for L36/L67

Gasket are opitonal, there really nothing that happends to valve cover gaskets. Just wipe them off. I've reused mine 3-4 time?

Posted: Sun May 16, 2004 3:26 pm Post subject:

20-30 HP same milage and sound and looks stock

update

So the car lost about 1 psi. Down to 8.5-9 form the 10-11 with a 3.4
So 3.25 time. Cool

And the car pulls harder too. Hopfully he's fill this in,

side note. This 2000 GTP has a differnt heat hose/coolent block type housing. That is really close to the rear vavle cover, So you can't sneek the cover under it. You have to do exta work to get the rear valve cover off. Alt and support bracets need to come off, with the MAP. A few PS pump bolts. And all the bolts for the heater hose/coolent block housing. But that has the 2 coolent elbows in them. You don't want to break them. But you have to get the housing part off. The elbows are at differnt angles. So you stress them, the get enogh room to get the v-cover off. And you lose collent. Figures 1st 2000 I've had the rear vavle cover off. 97-98 ar the same 99+ have the heater hoses on the fireway and the differnt alt brackets. Larry. Doug and Chads 01 wern't like this but 00's are?

Posted: Tue May 18, 2004 9:24 am Post subject:

if i only had $250 Sad

	Upstate New York Club Grand Prix Forum Index -> Classifieds	All times are GMT - 5 Hours
Page 1 of 1