FS: ZEX kit. LS1:AC,shifter,foglight,85mm MAFF

2001 AC system
T56 stock shifter
foglights
tracion control system
cruise control system
stock suspensions parts

make offer

ZEX dry kit, 55,65,75hp jets. 10# bottle, Like new. Very easy to hide small nossle (comes with wire loom) No WOT switch, uses a adjustable TBS volt singal (1 wire to hid) Kit was installed for 3 years, not one person ever found it. $525 new. looking to get $425 I think the bottle is mostly full too still

85mm MAFF kit, everything to plug and play.

3-5wire harnes
The silicone cuplar
Has screen, its mint with no dents at all

I bought it, a while ago and not going to use it now.
$130

[/img][/list]
_________________
New Era performance

01z28, M6 NA, mullet, T tops, siqqqq

Posted: Thu Jan 03, 2008 10:15 am Post subject:

Anyone that buys the ZEX kit, Ill shop you how to hind it Cool

Posted: Sun Feb 03, 2008 11:35 pm Post subject:

:snky:

Posted: Fri Feb 08, 2008 9:41 pm Post subject:

more shit

foglights sold

more shit

50K LS1 balencer

camro washer tank with pump

salve 50k off my 2001

AC under hood parts do far

3800 parts

off a 01' L67 with about 25K on them.

5/16 4130 Chromoly Pushrods 7.00 lenth .08 thickness.
I used them for about 5k miles.

They are like new. I bought them from ZZP, for $100
Asking $50 shipped

New Re usable rocker bolts.
Info
http://www.zzperformance.com/grand_prix/products1.php?id=380&catid=104
http://www.intense-racing.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=INT-RAB&Category_Code=HCV&Product_Count=3
These would cost you about $30 shipped.
Selling for $20 shipped (US)

New JP duble roller timming set $100

Clean low millage flexplate, off a 22k L67 for a swap that never happened. I redrilled it for a 245mm convertor pattern (I bought a new L36 just for drilling them),The holes are clean and de burr'd. Just a spare I have sitting around, nothing wrong with it.

The flexplate, Intense-racing sell them as a service for $40, just for drilling the holes. With a $40 core charge, if you don't have just a used stock flexplate. And shipping is $9 (one way) So it cost about $89 to them comparatively, witch is a lot of money.
http://www.intense-racing.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=DFP-L67&Category_Code=T&Product_Count=25
I'm sell it for $50

ZZP (also fits intense pullies) used, no damage or anything, very clean.

2.70 pulley (black) Like new $35 shipped

3800 head porting stand I made. locks the heads in any angle, with the end bolts. Works great. Lets alot of light in, gets the heads up a little, off the work bench. Easy on you neck,back, and wrists.
$40

GM intercooler fill air bleed. This is the LSJ one. New never used. Has a fill cap with 5psi system pressed. This incresses the efficty of the IC system. asking
$30
http://www.wbodystore.com/grandprix/intercooler-fill-reservoir-kit-p-113.html

PS pump, Off a 31K 3800. With pulley. The nipple off the res. is broke. So your have to use your current one. Its very clean, looks new.
$30

NEW GM PS pump, In box, never used. Has the GM install diagram and paperwork.
$80

DUB gen2 hub. With bolts, are clean no rust. Threads are great turn by hand. The end of the hub had some marks, from puller pullers. But it works fine,
$35

Posted: Fri Feb 08, 2008 9:59 pm Post subject:

hey i'll take the zex kit if you still have it and its a full kit

Posted: Fri Feb 08, 2008 10:33 pm Post subject:

actually i am going to back out i'm going to buy a differant kit

	Upstate New York Club Grand Prix Forum Index -> Classifieds	All times are GMT - 5 Hours
Page 1 of 1