gen3 m90 ported case, bad ass

 
Post new topic   Reply to topic    Upstate New York Club Grand Prix Forum Index -> Classifieds
View previous topic :: View next topic  
Author Message
studderinOffline
Top Dog
Total posts: 6268

Avatar

John Csotello
1998 Grand Prix GTP
Joined: 01 Oct 2003
Location: 2nd gear burnouts
Age: 37
PostPosted: Sun May 19, 2013 12:22 pm    Post subject: gen3 m90 ported case, bad ass Reply with quote

selling a, gen3 m90 case. Lots of port work and performance upgrades! Pic speak for themselves [8D]
Some info if you don't notice everything your looking at: Inlet is fully ported, Tb opening is 75mm and fully ported to the rotors. Inlet is also straiten, lowered and widened to the rotors. Not just Tb hole opened to 75mm and blended to the stock surfaces with a quick sanding to look "ported". EGR passage and the mixing divot after is filled and blended. Not ground out into the inlet making it worse. Filled with a 2 part epoxy used on race engines, heads and intake, prepped right, and locked in. It will never come out.
Outlet pocket is machined out to match a IC, will bolt to and run fine non-IC too. Outlet is hand blended for a perfect smooth surface. Machined and moved over to copy the gen5 outlet style performance. The end of the outlet has been thinned to do this, but still strong for no issues for years and thousands of miles. (need the shorten the 2 lower snout bolts like normal for max performance) Case is cleaned (hot wash bath) and ready to be assembled. Old case bearing have been removed and ready for new fresh ones.
Performance results. Same person a few years ago (haha 8??? now) did this style port work gen3 m90 ran 11.4. And other cars have been 11.6 and high 11's. Also on the top hp chart, (and some not on there)






No core needed, more pics available. Port can be adjusted for 78,85,90mm +ect TB, custom IC ect.

$375










_________________
New Era performance


01z28, M6 NA, mullet, T tops, siqqqq
Back to top
View user's profile Visit poster's website 
studderinOffline
Top Dog
Total posts: 6268

Avatar

John Csotello
1998 Grand Prix GTP
Joined: 01 Oct 2003
Location: 2nd gear burnouts
Age: 37
PostPosted: Tue Sep 03, 2013 7:29 am    Post subject: Reply with quote

$200
Back to top
View user's profile Visit poster's website 
KC2GIWOffline
Top Dog
Total posts: 5563

Avatar

Matt Antonio
1998 Grand Prix GTX
Joined: 11 Jun 2004
Location: SYR/ROC
Age: 19
PostPosted: Fri Sep 06, 2013 1:17 pm    Post subject: Reply with quote

How about I just give you a stock one. For free.
_________________
Hi, I'm Matt. I'm the resident smartass and I have fourblack children: (ok, one's only half black..)
07.5 2500HD, Duramax, Edge Race Evo CTS, MBRP 5" Stainless, TransGo, Sleeves, EGR!, PCV
09 VRSCDX - Night Rod. Flat black, gloss black
02 Black Z06. All work done by New Era Perforamnce. 519/497 at the rear, 3100 lbs.
05 Arctic Cat Firecat F7 - Sold
07 Arctic Cat F8 Sno Pro - Smashed into 1000 orange pieces.
Back to top
View user's profile Send e-mail 
studderinOffline
Top Dog
Total posts: 6268

Avatar

John Csotello
1998 Grand Prix GTP
Joined: 01 Oct 2003
Location: 2nd gear burnouts
Age: 37
PostPosted: Sat Sep 28, 2013 4:54 pm    Post subject: Reply with quote

trade?
Back to top
View user's profile Visit poster's website 
Display posts from previous:   
Post new topic   Reply to topic    Upstate New York Club Grand Prix Forum Index -> Classifieds All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

AlbumAlbum   CalendarCalendar    FAQFAQ     SearchSearch    MemberlistMemberlist    UsergroupsUsergroups   RegisterRegister    ProfileProfile    Log in to check your private messagesLog in to check your private messages   Log inLog in 





Contact Administrator

Powered by phpBB © 2001, 2005 phpBB Group