2006 Mod-Day - Syracuse, NY - Saturday, Sept. 30, 10a-6p

Last edited by redross17 on Sat Sep 30, 2006 8:11 pm; edited 9 times in total

Who's in?

It will be at Scott McAvoy's work digs in Syracuse--directions to follow.

I'm thinking pizza and wings might work for lunch (so bring a couple bucks), and Erie Blvd. is nearby if people want to stick around for dinner later on.

1. Scott M
2. Brian R
3. John S ?
4. Todd
5. Cliff
6. Jay (junior)
7. John C
8. Brian (bronzgt2000) ?
9. Sean ?
10. Keith

[like before, just throw your name up, I'll update this post]
[unlike before, if you have to bail out, make a new post...but you'll still be a bastard!]

Also, note if you need any tools and what you're planning on working on, or if you'll just be there to help or supervise!
_________________
2018 Acadia
Retired: 2014 ATS, 2004 GTP

Posted: Tue Aug 29, 2006 11:28 pm Post subject:

Sounds good, I'll let ya know in a few days if I can make it the 'rents are flying up to visit sometime mid-sept. As soon as I find out when/if they're comin' for sure and when they'll be leavin' I'll let you guys know for sure.

Posted: Tue Aug 29, 2006 11:59 pm Post subject:

Address is.................

6838 Ellicott Drive
East Syracuse, NY 13057

Easiest directions I can give are...........

Take Thruway to exit 35 Rt. 298 exit.
This will bring you to Carrier Circle, off the ramp stay to the right and follow signs for Thompson Rd.
Take the first Thompson rd. exit, this is the very first exit you come to off the thruway (if you take the 2nd Thompson rd exit you will be going WAY WAY in the wrong direction, so Don't take that exit!!!!)
Follow Thompson Rd to where it meets Molloy Rd....maybe 3/4 to 1 mile from the thruway.
Turn right onto Molloy Rd
take Molloy for 1/4 mile and on left you will see a M&T bank....this is right on Ellicot Dr.
Turn left onto Ellicot Dr, and follow rd all the way to end....stay to the left and you will see my office on the left, It is in the middle of the building, but look for my car or any GPs and you can't get lost.
_________________
2002 WRX Wagon - SOLD!!
2009 Toyota Rav 4 Sport.... Yeah.......

Posted: Wed Aug 30, 2006 12:11 am Post subject:

OH!!!!!!!!!!!!!!

If you are planning on doing ANY work to your car that requires a jack or jack stands, make sure you bring some plywood or 2x4s with you, as the parking lot is paved, and you WILL damge the pavement if you jack up on the asphalt!

If you are planning work with fluid, PLEASE bring and drain pan with you, and also bring newspaper or shop towels to put under the pan.....there can be NO STAINS....PERIOD!!!!!!!!!!!!!

Also bring your own tools! there will be some tools available, but if you are planning something specific, make sure you have all tools required as there is no guarentee that other people will bring those exact tools. There is a Sears, Home Depot, and several smaller hardware stores within driving distance.

Lets all remember that this is OUTDOORS, so weather may be an issue...if we have to cancel for rain, Brian will let you all know when the rainout date will be.
And with this being outside, please keep in mind that it WILL get dark, so plan accordingly, if everything you read tells you it takes 12 hours for install....don't plan on doing it at mod day, as you WILL run out of light!

Anyway, this will be alot of fun, so I can't wait to see you all there!

Posted: Wed Aug 30, 2006 7:09 am Post subject:

I will be there just remind me that week or the day before.

Posted: Wed Aug 30, 2006 8:23 am Post subject:

hmmm ill possibly be there..
_________________
MODS: Stock

Posted: Wed Aug 30, 2006 12:28 pm Post subject:

I'm There!!! Very Happy

Posted: Wed Aug 30, 2006 1:11 pm Post subject:

#1, I need to change my trans fuild.

#2 dose the parking lot have a open grate drian
_________________
New Era performance

01z28, M6 NA, mullet, T tops, siqqqq

Posted: Wed Aug 30, 2006 4:40 pm Post subject:

Posted: Wed Aug 30, 2006 4:56 pm Post subject:

ya id drop some 10mm blots in there. Laughing

Posted: Wed Aug 30, 2006 5:35 pm Post subject:

I'm in
_________________
2004 Yukon XL Trying to keep stock
2000 gtp Custom I/C, TOGs, Custom PCM, 3.25'', HAI, VS cam Retired

Posted: Thu Aug 31, 2006 6:39 am Post subject:

_________________
1998 Silvermist GTP Coupe
Bone stock unicorn
1998 True Green Metallic GTP Coupe
Pullied, cammed, intercooled. With a kiddie seat. It once ran a 13 flat.
1998 True Green Metallic GTP Sedan (retired)
Stock: 14.33 @ 96.5
PB: 13.89 @ 101 mph

Posted: Thu Aug 31, 2006 11:00 am Post subject:

Gotta check my calendar but maybe it's time for these:

Posted: Thu Aug 31, 2006 11:07 am Post subject:

That's a lot of money....
_________________
Hi, I'm Matt.

I'm the resident smartass and I have fourblack children: (ok, one's only half black..)
07.5 2500HD, Duramax, Edge Race Evo CTS, MBRP 5" Stainless, TransGo, Sleeves, EGR!, PCV
09 VRSCDX - Night Rod. Flat black, gloss black
02 Black Z06. All work done by New Era Perforamnce. 519/497 at the rear, 3100 lbs.
05 Arctic Cat Firecat F7 - Sold
07 Arctic Cat F8 Sno Pro - Smashed into 1000 orange pieces.

Posted: Thu Aug 31, 2006 11:34 am Post subject:

	Upstate New York Club Grand Prix Forum Index -> Club Events	All times are GMT - 5 Hours Goto page 1, 2, 3, 4, 5, 6 Next
Page 1 of 6