FS gauges

Posted: Mon Sep 04, 2006 10:08 pm Post subject: FS gauges

Autometer sport-comp serise 2 1/16 gauges
http://www.3800performance.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=AM-SC&Category_Code=INEX&Product_Count=20

Mech, BOOST gauge. Works great, no scatces or dents. Neddle zeros on the hi side of the zero sqare. But is acute to other gauges (tested) seen in pic Comes with line and a rubber T for install new $54 looking for $35obo

Ele. Trans temp. Works great, no scatces or dents. Have sender and harwear.
new $48. looking for 30 obo

Ele. Oil presser Works great up intill I have a CV boot clamp cut the wire, on the dyno. But worked untill that, no scatces or dents. Have sender and harwear.
New $60 looking for 35obo

I also have a harness I made for plug and play of the ele wires. All coections are soiled and coverd in heat shrink tubing. Ran to Tap off the Intior lights so thet dim with them, And a 3 bulbs have the red covers that match the intior lights great. And there a Ground harness 3-1 with O terminals to atcah the the gauges, and O tremial to ground the harness to a bolt on the streering colum brace under the dash. Buy all 3 gauges or 2 with the piller and its your. This is the biggest PITA about installing gauges in doing all the wiring for the lights, and gounds (lights and senders) Just need to run 1 wire to the ele sending units you install in the trans, and oil filter housing for the singal. And the tubing for the boost gauge.
Ill get pics latter
_________________
New Era performance

01z28, M6 NA, mullet, T tops, siqqqq

Posted: Mon Sep 04, 2006 11:58 pm Post subject:

I might be interested in the oil pressure and trans temp guages. Possibly the boost guage too if there is a package deal. I would not need the pillar pod or the wiring though as they would go to the bonneville.

Posted: Tue Sep 05, 2006 12:04 am Post subject:

cool, the wirring will work for any car.

the power hraness I did red. and has a 1/4 spade end. Just put on of those Ttap over e intor dimp light, and clip it on.
you can find any ground bolt for the O tremial.

Im talking so much about this dam harneses becuse it took like a few hrs to make. LOL and I dont wnat to just tho it way.

the boost for the bonnie Cool

Posted: Sat Sep 09, 2006 1:42 pm Post subject:

Posted: Sat Sep 16, 2006 1:49 pm Post subject:

still got the boost gauge?
_________________
2004 Yukon XL Trying to keep stock
2000 gtp Custom I/C, TOGs, Custom PCM, 3.25'', HAI, VS cam Retired

Posted: Sat Sep 16, 2006 8:57 pm Post subject:

Posted: Sun Sep 17, 2006 12:29 am Post subject:

i'll go $35 on it as long as it comes w/ everything needed to install. pickup/install mod day?

Posted: Sun Sep 17, 2006 9:58 am Post subject:

im not gona install it for you

Posted: Sun Sep 17, 2006 10:19 am Post subject:

not $35 installed, $35 for everything needed to install(hoses, gauge, rubber t, etc...)

Posted: Sun Sep 17, 2006 10:36 am Post subject:

comes with whats in the pics. there writes online if you need instructions

Posted: Sun Sep 17, 2006 10:42 am Post subject:

http://www.grandprix.net/upgrades/boostgauge.html
Here's a write up to install Smile

_________________
My cars:
2004 Grand prix GT
2000 Cadillac Deville DTS

Posted: Tue Oct 24, 2006 9:49 pm Post subject:

	Upstate New York Club Grand Prix Forum Index -> Classifieds	All times are GMT - 5 Hours
Page 1 of 1