2007 Spring Mod Day - April 14th 10a-4p

Posted: Mon Mar 19, 2007 7:45 am Post subject: Mod Day

I'd like to check out mod day, and meet some of you guys. How about someone sending me an address with zip so I can use my gps to find the palce. Thanks.

Posted: Mon Mar 19, 2007 12:13 pm Post subject:

should be there
_________________
'08 TrailBlazer SS Black/Black

Posted: Mon Mar 19, 2007 3:20 pm Post subject:

complete with Johnny's tire marks from last time.

_________________
1998 Silvermist GTP Coupe
Bone stock unicorn
1998 True Green Metallic GTP Coupe
Pullied, cammed, intercooled. With a kiddie seat. It once ran a 13 flat.
1998 True Green Metallic GTP Sedan (retired)
Stock: 14.33 @ 96.5
PB: 13.89 @ 101 mph

Posted: Tue Mar 20, 2007 10:41 am Post subject:

When I flew into Buffalo in December I was able to pick out that place. I thought I saw tires marks. Smile

Posted: Tue Mar 20, 2007 11:46 am Post subject:

I might be able to make it up also! Surprised

I am definitely coming up to Buffalo either the weekend of the 31st or the 14th to meet with Gary, go to the dyno shop, and do some pulls and tuning etc. Gary holland is going to bring his software etc and help me out.

If I go on the 14th i'll try and dyno in the early AM, then swing over to Marino's to see you guys
_________________
2000 GTP 13.5 daily driver
1970 SS502 Chevelle fun driver, times unknown, for now Razz

Alcohol Steward and Bartender
UNYCGP Council of Elders

Posted: Wed Mar 21, 2007 11:32 am Post subject:

Idont mean to go off topic but, where are u dyno'ing Cary?
_________________
ZZP stuff...
Heads (started as ZZP stg.3 with some improvements)
Cam (XPZ with a slightly different components for valve movment)
IC (Ford Cobra coolant resv., frt exchr the size of a engine rad. weight consum. rear expans. tank)
"Certified Auto Trans Shop" Transmission sold by ZZP...I have no comment for this peice of...great trans. Wink

Also,
SLP Headers <--FOR SALE
Eaton's Gen.3 M90

Posted: Wed Mar 21, 2007 11:52 am Post subject:

Posted: Wed Mar 21, 2007 11:57 am Post subject:

I believe P&J speed shop will do that as well.. I think.. Call them if you want to check, 716-694-6363
_________________
Fast. Cheap. Correct. Pick any two.

Posted: Wed Mar 21, 2007 6:30 pm Post subject:

im up for this. as being one of the new guys its a great opp to meet you all.

if you guys need a welder i have a small 120v one that i use at home that i could bring up for you guys to use.

hopfully ill have something i could install on that day. maybe you guys can help me out with some problems im having with the impala

Posted: Wed Mar 21, 2007 8:15 pm Post subject:

Can we swap my motor?
_________________
Hi, I'm Matt.

I'm the resident smartass and I have fourblack children: (ok, one's only half black..)
07.5 2500HD, Duramax, Edge Race Evo CTS, MBRP 5" Stainless, TransGo, Sleeves, EGR!, PCV
09 VRSCDX - Night Rod. Flat black, gloss black
02 Black Z06. All work done by New Era Perforamnce. 519/497 at the rear, 3100 lbs.
05 Arctic Cat Firecat F7 - Sold
07 Arctic Cat F8 Sno Pro - Smashed into 1000 orange pieces.

Posted: Wed Mar 21, 2007 8:38 pm Post subject:

Posted: Wed Mar 21, 2007 9:16 pm Post subject:

The correct answer is "yes, we can" followed immediately by "no, we won't"

Posted: Thu Mar 22, 2007 9:34 am Post subject:

Posted: Sat Mar 24, 2007 8:36 am Post subject:

OK I'll try this again.....

I split the threads because we were wandering FAR off the topic, and I could see it becoming a flame fest. So I created the other thread just so you could flame away.

So let's stick to Mod Day talk only.....Thanks!

Last night I posted I split the thread, But obviously the Lack of ANY problems here caused my post to not appear.....???? Sorry for the confusion, I really didn't mean to be the "Ghost Mod".

Posted: Sat Mar 24, 2007 12:28 pm Post subject:

	Upstate New York Club Grand Prix Forum Index -> Club Events	All times are GMT - 5 Hours Goto page Previous 1, 2, 3, 4 ... 14, 15, 16 Next
Page 3 of 16