| View previous topic :: View next topic |
| Author |
Message |
mguzzo Total posts: 2863
Michael Guzzo1998 Grand Prix GTP Joined: 03 Oct 2003 Location: in front of you Age: 57 |
 Posted: Tue Jul 31, 2007 9:29 pm Post subject: M-m-mini mmod day |
 |
|
I'm taking a couple days off this month and will be doing some mod work.
August 17 and 18 (Fri and Sat). Feel free to stop by if you want to. I;m repairing my AC (replacing condensor) and will probably be pulling off my SC to replace the coupler. Hey, how's those IC plates get in there?
12 Carla, off Angle near SW Blvd in West Seneca.
_________________
1998 Silvermist GTP Coupe
Bone stock unicorn
1998 True Green Metallic GTP Coupe
Pullied, cammed, intercooled. With a kiddie seat. It once ran a 13 flat.
1998 True Green Metallic GTP Sedan (retired)
Stock: 14.33 @ 96.5
PB: 13.89 @ 101 mph |
|
| Back to top |
|
 |
| redross17 Total posts: 3600
Brian Ross2004 Grand Prix GTP CompG Joined: 11 Dec 2003 Location: Buffalo Age: 48 |
| Posted: Wed Aug 01, 2007 6:52 pm Post subject: |
|
|
<- Likely in for Saturday, depending on when you're (re)starting.
_________________
2018 Acadia
Retired: 2014 ATS, 2004 GTP |
|
| Back to top |
|
|
| someone Total posts: 284
Mark2007 Other Car Joined: 02 Feb 2005 Location: Rochester |
| Posted: Thu Aug 02, 2007 9:06 pm Post subject: |
|
|
I just did my condenser and radiator... wasnt too bad,
prior a day or so before starting the job, soak the trans connectors to the radiator. pb blaster |
|
| Back to top |
|
|
| mguzzo Total posts: 2863
Michael Guzzo1998 Grand Prix GTP Joined: 03 Oct 2003 Location: in front of you Age: 57 |
| Posted: Fri Aug 03, 2007 1:08 pm Post subject: |
|
|
Thanks! I have a can of PB for that purpose.
I;m not looking forward to this. How long did it take? |
|
| Back to top |
|
|
| Joe_Omerta Total posts: 867
Joe Ventresca2000 Grand Prix GTP Joined: 24 Jul 2005 Location: Blasdell Age: 37 |
| Posted: Sun Aug 05, 2007 9:34 pm Post subject: |
|
|
as long as ur reusing ur radiator, u can use the clips for the trans lines and won't have to mess w/ the actual fittings. there's a metal horseshoe type clip that holds them in, just don't lose the clip.
_________________
2004 Yukon XL Trying to keep stock
2000 gtp Custom I/C, TOGs, Custom PCM, 3.25'', HAI, VS cam Retired |
|
| Back to top |
|
|
| seen96 Total posts: 2033
Drag Radials Suck on FWD.1997 Grand Prix GT Joined: 01 Oct 2003 Location: elbows deep in 4t65e Age: 45 |
| Posted: Sun Aug 05, 2007 10:01 pm Post subject: |
|
|
Those clips are a real PITA to find. I swear, I spent half a day one time, trying to find one. I even had 2-3 other people look. It was sitting under the damn rad. in that ~ledge~ thing. Also, sone dealers have to frggen order them. WTF, how dont those tech's ever lose em..ya know? 
_________________
ZZP stuff...
Heads (started as ZZP stg.3 with some improvements)
Cam (XPZ with a slightly different components for valve movment)
IC (Ford Cobra coolant resv., frt exchr the size of a engine rad. weight consum. rear expans. tank)
"Certified Auto Trans Shop" Transmission sold by ZZP...I have no comment for this peice of...great trans. 
Also,
SLP Headers <--FOR SALE
Eaton's Gen.3 M90 |
|
| Back to top |
|
|
| studderin Total posts: 6272
John Csotello1998 Grand Prix GTP Joined: 01 Oct 2003 Location: 2nd gear burnouts Age: 42 |
| Posted: Mon Aug 06, 2007 1:39 am Post subject: |
|
|
ya larry lost his so he took mine.
...almost got it...... ping....... fuck.. i think it hit that wall...
....um........ fuck.....
_________________
New Era performance
01z28, M6 NA, mullet, T tops, siqqqq |
|
| Back to top |
|
|
| BigEd88 Total posts: 704
Ed Green2004 Grand Prix GTP CompG Joined: 19 Apr 2007 Location: Amherst (Buffalo), NY Age: 36 |
| Posted: Sat Aug 11, 2007 8:05 pm Post subject: |
|
|
Next weekend I plan on doing my plugs/stat/downpipe/pulley. I may stop by for some portion of it 
_________________
Best Formula N-A 12.1 @ 110 (pre-engine swap) |
|
| Back to top |
|
|
| mguzzo Total posts: 2863
Michael Guzzo1998 Grand Prix GTP Joined: 03 Oct 2003 Location: in front of you Age: 57 |
| Posted: Sun Aug 12, 2007 11:28 am Post subject: |
|
|
| no problem. |
|
| Back to top |
|
|
| BigEd88 Total posts: 704
Ed Green2004 Grand Prix GTP CompG Joined: 19 Apr 2007 Location: Amherst (Buffalo), NY Age: 36 |
| Posted: Sun Aug 12, 2007 1:58 pm Post subject: |
|
|
| The main thing I need is a pulley puller. Once I have all the goodies on I'll take it easy until I get a scanner on it to see where I stand. |
|
| Back to top |
|
|
| seen96 Total posts: 2033
Drag Radials Suck on FWD.1997 Grand Prix GT Joined: 01 Oct 2003 Location: elbows deep in 4t65e Age: 45 |
| Posted: Sun Aug 12, 2007 5:55 pm Post subject: |
|
|
| I have the ZZP Pulley Puller, but, need the big threaded bolt/part. If no one else has one....I'll order it up. |
|
| Back to top |
|
|
| ROSS3R Total posts: 1376
Kenny Rosser2000 Grand Prix GTP Joined: 07 Oct 2004 Location: Binghamton/Vestal, NY Age: 43 |
| Posted: Sun Aug 12, 2007 5:59 pm Post subject: |
|
|
Ed, I hope everyhting works out with the DP and resonator. Let me know how it turns out.
_________________
2000 PONTIAC GRAND PRIX GTP
VS|TOG’s|ZZP II IC|ZZP Stg II TB|Stg 4 Gen III|2.8 MPS |
|
| Back to top |
|
|
| BigEd88 Total posts: 704
Ed Green2004 Grand Prix GTP CompG Joined: 19 Apr 2007 Location: Amherst (Buffalo), NY Age: 36 |
| Posted: Mon Aug 13, 2007 7:47 pm Post subject: |
|
|
| DevilMayCry wrote: | | Ed, I hope everyhting works out with the DP and resonator. Let me know how it turns out. |
Decided to go to mufflerman after work today, glad I did, the bolts holding the flanges together were very rusted, so much so they torched them off, needed about a 5 inch extension to get the post resonator section to attach. Out the door for 75 bucks.
Still ahead of the game and now I have a 1 year warranty on all the work they did (if a leak appears at a seal etc)
So far I like the sound, more or less just louder than stock but it has a bit more rumble now. All in all I'm pleased.
Hmm maybe all I need done Saturday is a pulley puller if I tackle the T-Stat after work at some point |
|
| Back to top |
|
|
| loudgp Total posts: 593
Greg1996 Grand Prix GT Joined: 03 May 2006 Location: Ny Age: 43 |
| Posted: Mon Aug 13, 2007 8:01 pm Post subject: |
|
|
| i have a puller also. Its a copy of the zzp old style, works good.... |
|
| Back to top |
|
|
| mguzzo Total posts: 2863
Michael Guzzo1998 Grand Prix GTP Joined: 03 Oct 2003 Location: in front of you Age: 57 |
| Posted: Fri Aug 17, 2007 6:12 pm Post subject: |
|
|
Update on progress
Got the AC condensor R&D'd.
Pulled the SC and changed the coupler.
Spent two hours scraping gaskets. Ick.
Installed SSIC and SC. Installed fuel rails with new injectors.
Then the UPS guy arrived with a PLOG. So tomorrow that's going on and new fuel pump.
tonight i'm double checking everything so far. I didn't like the way the injectors felt when they pushed down into place. I oiled the O rings and cleaned out the bosses, so I'll push them down again. And there are other things that don't mount now that the SC is an inch higher.
anyone in buffalo have a stock SC belt? I have a 660 for a 3.4 and need a longer stock belt. |
|
| Back to top |
|
|
|
Album
Calendar
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages 
Log in