FS "lots fo parts.. updated

Posted: Wed Jan 02, 2008 12:17 pm Post subject: FS "lots fo parts.. updated

http://www.clubgp.com/newforum/tm.asp?m=4189868&p=1&tmode=1&smode=1

Just added***********

Used driver headlight CHEAP. This is not flawless. It has some cloudness, and light scrathes. But would clean up really nice with the $11 peratex headlight reso kit. Its 1000/1500/2000 grit wet sandpaper, plasitc polish, and polish rag. I used this kid on my camaro and the lights look new. http://www.ls1tech.com/forums/showthread.php?t=157192 they also have some rtv on the outside that need to be cleaned off. I think someone tired to re seal them? The headlight is also perfect for removing the lens, and making a ram air type scoop for your TB or turbo. Cheap looking to get $20

Trans parts: everyting is 4t65e HD I cleaned up alot of spare trans, and extra part. Need to make some room. So these are up for sale, this is just what I have ready to sell, I took a pic of. I still have a lot of trans parts I need to go thu. Ask if you need anything, for your rebuild. Anything from bare case, to little part. Small parts add up anyting at adds up to like $20. I'd rather not waste the time to ship out a $10 part. Unless you have bought parts form me before. Or local pickup is always welcome.

HD output shaft. No damage, Like new. $30

trans pump, SOLD

Side cover gasket, Good non damaged. These new are somthing crazy like $85 new. Looks to get $35 for it.

Pan gaskets, these are good non damaged GMs I saved. Way better then a shit cork one if you dosnt have a GM on your car anymore. They are great gaskets are seal fine. Also new cost alot, $45 I recall. asking $20

Pump shaft. SOLD
Hardened 4th hub shaft. SOLD

HD diff cover (the one in the pic has some dirt on the outside). no damage. must have for you guys racing without a spotter every time Sad

$60

HD diff cover, Not in pic I found this last night. Has some paint marks, Like form a rebuild shop. Its used But was presser washed, or steam claned or somthing Its very clean alum. $70

also has good VSS senors, and diff cover 0rings if you diff take out the Oring with the cover.

Extra new clutchs. Not everything for a full pac setup. But a must have for setting up you trans up tighter to hold more power. With adding a extra clutch, no wave plates ect. about 3-4 clutches/steels for each.
$15

Partial 3.69 single chain set. This is a bad ass upgrade, Zooomer went 9's on this setup. I can't find the drive gear, I hope it turns up. But its the good 7/8th stiff chain, Not the weaker "soft" 7/8 chain some people get. ZZP clains this chain is stonger then the 15/16th chain setup. And the moded gears to bolt in a 4t65hd. And a mint VSS wheel with no damage to the rivets to work with the drive gear. I forgot if I even ran this. It was probably just a back up, for a car I was setting up. Ill get a price tomorrow for full set, and with no drive gear.

trans pan, CLEAN, No dents, bends, rust or anything. $30

I forgot the right name, The drive carrier plant thing? But its the assembly that had the planets gear sets, that gets damaged when debris passes thru the trans fuild. Its mint, planets, and rings have no damage. I recall this part was like $130-$200?? maybe, there a chunk to replace. asking $50

Driverhead light, looks cloudy form the flash witch is is. Just needed the $19 permatex headlight fine sand/polishing kit to clean right up. So this is not a like new, its fair. Or you can use it and Gut into into a hollow headlight, or make a nice looking molded inlet to your turbo or TB. Looking to get $20

New GM 3800 cam bolt unopened in bag $10 shipped (mainland US)

Manual driver seat rack, this is hard to find. I used it to save weight over the power rack. bolts right in, $25

Drilled 180* Tstat SOLD
Drilled 160* Tstat $5
New Alum cradle bushings $15
NEW Timing chain dampener. SOLD
NEW GM Timing Chain, SOLD

5/16 4130 Chromoly Pushrods 7.00 lenth .08 thickness.
I used them for about 5k miles.
[image]http://farm3.static.flickr.com/2410/2063338327_d08ea98c54_m.jpg[/image]
They are like new. I bought them from ZZP, for $100
Asking $40 shipped

New Re usable rocker bolts.
Info
http://www.zzperformance.com/grand_prix/products1.php?id=380&catid=104
http://www.intense-racing.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=INT-RAB&Category_Code=HCV&Product_Count=3
These would cost you about $30 shipped.
Selling for $20 shipped (US)

New JP double roller timming set $100

ZZP (also fits intense pullies) used, no damage or anything, very clean.
[image]http://i2.photobucket.com/albums/y11/studderin/IMG_0074.jpg[/image]
2.70 pulley (black) Like new $30 shipped
2.80 pulley (alum) Like new $35 shipped SOLD

PS pump, Off a 31K 3800. With pulley. The nipple off the res. is broke. So your have to use your current one. Its very clean, looks new.
$30

NEW GM PS pump, In box, never used. Has the GM install diagram and paperwork.
$70

thanks
John
Im a great seller.
http://www.clubgp.com/newforum/tm.asp?m=4127333&p=1&tmode=1&smode=1
http://www.clubgp.com/newforum/tm.asp?m=4139064&p=3&tmode=1&smode=1

ZEX dry kit, SOLD

tracion control system worked great $20

01 master 50K SOLD

LS1 Fbody balancer 50k $20

3800 head porting standd SOLD

2002 camaro SS catback, Uncut, no damage looks new, only has a few thousand miles on it. Car was never drivin $150

Mufflex 3.5' catback, chrome tips. Cut over axle
http://www.mufflex-performance.com/fbody_6.html
3 1/2 " over axel Pipe with Spintech� Crossflow Muffler with Dual 3" Tailpipe. Fits into 3" Stainless Round that Fits into Oval Tips for 98-Currernt LS1 F Body's.
New mufflex Price $662.12 plus Shipping & Handling
asking $300

85mm MAFF kit, everything to plug and play.
3-5wire harness
The silicone cuplar
Has screen, its mint with no dents at all

I bought it, a while ago and not going to use it now.
$130

_________________
New Era performance

01z28, M6 NA, mullet, T tops, siqqqq

Posted: Wed Jan 02, 2008 7:04 pm Post subject:

odd i see no text on the CLUBGP site.
_________________
Best Formula N-A 12.1 @ 110 (pre-engine swap)

Posted: Wed Jan 02, 2008 10:35 pm Post subject:

Try hitting refresh when you get on the page
_________________
2018 Acadia
Retired: 2014 ATS, 2004 GTP

Posted: Thu Jan 03, 2008 10:13 am Post subject:

has anyone sold anything on this site???

Posted: Thu Jan 03, 2008 10:21 am Post subject:

Posted: Thu Jan 03, 2008 6:47 pm Post subject:

I think all of my car's add-on's were purchased in some way relating to this site Razz

Posted: Mon Jan 07, 2008 12:23 am Post subject:

lifters sold

Posted: Tue Jan 22, 2008 6:52 pm Post subject:

added alot more parts, check the link out

Posted: Sun Feb 10, 2008 3:37 pm Post subject:

updated tge link

Posted: Sun Feb 10, 2008 3:52 pm Post subject:

Dibs on the gen2 Dub hub John, any pullies?
_________________

Posted: Sun Feb 10, 2008 5:32 pm Post subject:

I dont think so, I remeber having some, But I htink I let people borry them? I can look at my parent house?

when can you come get it. its with me in hennerttia. Ill hold it if you pay for it.

Posted: Sun Feb 10, 2008 8:43 pm Post subject:

Oh, I thought you lived out near churchville? Go ahead and take a look when ya get a chance,, I'll get some green together for ya.

Posted: Sat Feb 23, 2008 10:14 pm Post subject:

dub.flexplate,rockers, sold.

check the link for updates

Posted: Tue Feb 26, 2008 10:30 pm Post subject:

sold alot more,

added alot more parts too,.
check the link

Posted: Tue Apr 08, 2008 12:52 pm Post subject:

TTT for updates

	Upstate New York Club Grand Prix Forum Index -> Classifieds	All times are GMT - 5 Hours
Page 1 of 1