BronzGT2000 Total posts: 292
Brian2000 Grand Prix GT Joined: 24 Jan 2006 Location: Liverpool, NY Age: 38 |
Posted: Thu Oct 09, 2008 1:15 am Post subject: Would anyone be interested in a GT2 Cam setup? |
|
|
Hey I think i may have posted this before, but Im offering it again.. I have a GT2 Cam setup, Installed in a L36 motor out of a 2000 GP GT. The motor needs a new crank and possibly one Rod replaced. U can get a good reconditioned crank with all the fittings and barrings for about $250 at Advanced. The setup comes with ported and polished heads to go with the specs of the cam. I also have the PCM tuned for the cam, along with push rods from comp, comp lifters, 105 springs and modified retainers. This setup has about 1000 miles on it. The balance shaft spun and the shavings got to the crank, I would replace the oil pump as well. I'm thinking of rebuilding the motor but I need to make room in my garage soon so I'll let everything go for $750 or best offer. I would be taking a HUGE hit seeing how I sunk almost 4 grand into this motor, and the guy I had doing the work before I had experience Messed it up by using the balance shaft to keep the motor from turning over while undoing the cam bolt So let me know, if you have any questions just ask..
GT2 Cam Setup Complete installed with a full L36 - pulleys and such.
$750 or best offer!!!!
I'll even help you rebuild and install for no extra charge. I have done quite a few tear downs since this and 2 successful swaps. I have mostly all the tools to do the job as well, Cherry picker, Stand, Ect... _________________
2000 GP GT (Bronze) - L67 swapped)-It's Far From Over! |
|