'04 L67 complete top-swap, L32 rods - *PICS*

Posting on multiple forums, so act fast. (Selling local would be AWESOME for both of us.)

I've got a complete engine from an '04 Monte SS with 51k, pulled to replace (chipped #3 - PIC). Being one of the last "Series 2" engines, it has the better '03+ L32-style heads, along with the '04+ L32 balancer & rods.

Engine is very clean (PIC before removal/replacement), and nothing was harmed beyond the piston/bearing. I have dismantled the engine to inspect everything useful, because a local member was eager to buy this for me to install the top-swap, but didn't have the cash right now.

Not going to split the top-swap sale, as it's too nice to separate when everything's here. (see list & pics below)

Paypal or money order. Feel free to PM or email for any info not written here. I will update with more pics if requested.

COMPLETE Top-Swap - $650+shp
Includes all of the following from 51k '04:
*Gen 3 M90 w/ BBV (pulley removed w/ ZZP puller... can install something pre-shipping if you want)
*L67 LIM (has 2-wire ECT sensor, may need to swap in 3-wire ECT for pre-'04 cars, or convert to use this one)
*'04 heads (w/ rockers-springs-valves-covers... rocker bolts have been loosened during head inspection)
*black L67 coil/tensioner assembly (complete w/ coils-ICM-tensioner-ALL hardware-pulleys, will toss in front idler not shown)
*lower idler tower, pulley, bolts
*'04 harmonic balancer
*L67 rail w/ injectors-clips (can include harness ends, if needed)
*'04 L67 TB w/ cable bracket (descreened, I have a screen/snap-ring to install, if needed)
*TPS, IAC, MAF, ALL vac lines, ALL related nuts-bolts will be included & labelled

***PICS*** (temporarily rebuilt on engine for cleaner storage & photos)

ROTORS (rotated 1/3 turn for each pic)

Needed from store/vendor to perform top-swap with above items:
*head gaskets & bolts
*L67 supercharger gasket
*rocker bolts
*lower intake gaskets
*RTV and teflon tape/paste
*oil changes & coolant

Also:
*2-bar MAP-bracket-harness can be added by me, if you want to run an L67 pcm file

Other items seen on this engine are available for additional sale as well. (I'll be very generous with price if going to top-swap buyer, possibly toss-in some if asked.)
*EGR
*P/S pump
*front cover-W/P
*alternator bracket-tensioner
*ignition harness
*driver's side dogbone/motor mount bracket
*flexplate (258mm/HD, possibly has both patterns)

L32 rods - $150+shp
see pics to identify that they don't have rod bearing seams (a.k.a. 1-piece cracked after machining for crank, not 2-pieces bored for crank like '03-back)
~will label upon removal
~can sell still assembled with block/crank/pistons - $225+shp (obviously would need rebuild & new #3 piston)
I'll only begin to pull this apart for further pics if there's serious interest in the rods.

Some Rotating Assembly Photos:
Photo 1
Photo 2
Photo 3
Photo 4
Photo 5
Photo 6

I will comunicate thoroughly with buyers to make sure they get everything in & going. Shipping will include tracking #'s, and I will get a quote before finalizing cost... can send block on pallet if local pick-up/delivery isn't possible.

Install/tuning of the top-swap by me in NY is also an option.

Thanks,

- Dave P.

email & paypal (add 3%): dezldave961@hotmail.com
_________________
2004 Regal GSX - YouTube channel Stattama T67BB, A2W IC, ST5, heads, L32, GMR diff/chain (11.46 w/ Z7 T66, IS3t cam)
2006 Grand Prix GXP - K&N intake and mufflers only, basically stock for me
2012 F-150 EcoBoost SuperCrew 4x4 - stock DD and roadtrip vehicle
1998 Daytona GTP #838 - I/C*d MP112 L26 - Rust in Peace, engine saved

	Upstate New York Club Grand Prix Forum Index -> Classifieds	All times are GMT - 5 Hours
Page 1 of 1