View previous topic :: View next topic |
Author |
Message |
studderin Total posts: 6272
John Csotello1998 Grand Prix GTP Joined: 01 Oct 2003 Location: 2nd gear burnouts Age: 43 |
Posted: Wed Mar 25, 2009 12:53 am Post subject: 3800 stuff |
|
|
Making room of a lot of extra parts I have around. So many to take pics of, and boxes of stuff to look thew. I didn't clean anything up so it might be a little dusty or not the best pics. SO of this stuff isn't really worth alot, or even shipping cost. But I don't want to thow out good parts, when there all the beat cars out there. So theirs a MINIMAL OF $15 SHIPPED purcase.
All parts are listed shipped US mainland.
Good trans pan, 4t60 4t65 HD. no dents. $30 shipped
Good GM gaskets REPLACE THE SHIT CORK ONE ON YOUR CAR THAT LEAKS $15 shipped $5 with other parts, free $50 order
Side cover gasket $20 shipped $10 with other parts. These cost some BS like $50 new. Don't mess yours up. Good to have a spare.
Dog bones, missing one nut. Little surface rust from sitting in a box. ready for paint. But the bushing are great. $35 shipped
lifter trays $15 shipped $5 with something else, free $50 order
extranal range switch $15 shipped $5 with something else
crank sensor cover/harness shield $15 shipped $5 with something else
Good clean rocker ~50k miles $30 shipped
stock EGR "penny mod" block over plate. threaded for rear manifolds/headers $5 with something else, free $50 order
clean knock sensors $20 shipped
clean front cover, painted gun metal. Comes with oil pump inner/out rotor. No pump cover $25 shipped
2 New in box Gm bushing for a alum cradle PN 15240253 $15 shipped
used HD diff cover, no damage $25 shipped. get a spare if you have a LSD.
L67 SC belt idler mount $5 with somthing else. free over $50
lower inspection cover $5 with somthing else. free over $50
New felpro L67 valvecover gaskets, and bolt seals $30 shipped
New napa front contraol arm bushing 267-3504 $5 with somthing else. free over $50
Good working used PS pump, res. nipple in broke off, easy to put yours on $20 shipped
Mint used HD diff cover, with VSS $35shipped
good SC belt 6rib 660 $15 shipped $5 with somthing else
Good L67 ballencer, heavy $35 shipped
New bourg 4t65 HD hight engery band, beliove this is the FWD band $15 shipped $5 with somthing else
LS1 TB to maff bellow $15 shipped
wheel spacer $15 shipped
good ford 5x8 speakers form a focus, also fit my 2001 E350 truck $25 shipped
Casper O2 sims. $45 one, $80 pair shipped
clean driver claiper 2002 30K miles, bracket, pads,line everything $50 shipped
Gas cap, $5 with purcuse of somthing else over $10.
fuel line, and Evap line. clean, stock heat wrap $25 shipped
good wheel bearing 02 30K $75 shipped
tracion control box, with cables $30 shipped
LS1 coil $25 shipped
(note this is the gaterback AC belt)
Denso 02, like new $35
gauge cluster ~135K $35 shipped
good Gm 02 $20 shipped
PCV cover, free with other shit
good cam plate $15 shipped $5 with other stuff free over $50
cam magnets $15 shipped $5 with other stuff free over $50
oil level sensor $15 shipped
Crank sensor $15 shipped
coolant temp sensor $15 shipped
knock sencor $25 shipped
cam sensor $15 shipped
drilled 180 Tstat $15 shipped $5 with other stuff
good ICM $25 shipped
DIY, rear air damn. some build info here.
http://www.clubgp.com/newforum/tm.asp?m=3389035&appid=&p=&mpage=1&key=bumper&language=single&tmode=&smode=&s=#3390004
Not flawless, but works great. small cracking is stopped with a little hole in the end. The passenger side tip shield has a bigger crack that is tapped. Once installed, you can tape the seams to make it 100% airtight anyway. Fit for smaller boarla XS mufflers on a M90 car that trapped 120s no melting, not sure of a larger case mufflers? Comes with bag of maounting hardwear, a few might be missing but easy to get more. all 6-32 screws, and self tapping sheet matal screws. No instuction $40 shipped
New reusable rocker bolts. $20 shipped
HP output shaft, heavy $30 shipped
new spare clutches. Not enoght for a full pac. But a must have for DIY rebuiders setting up your own... no wavy plates.
2 4th raybestous high engerys
looks like a full pacfor input. borges (not the Zpacs)
2 for 3rd? not sure anymore havnt been in a 65hd in a while.
$15 shipped $10 with other stuff
Good 7/8th chain 3:69 gear set, driven gear ONLY $15 shipped
Good reluctor ring, no rivit damage $15 shipped
7/8th chain had a cracked/missing plate? free if you wnat it with other stuff? Somone builds race trans buy this stuff for spare parts $30 shipped.
Good belts, the 8ribs are not cheap, $40 new
good light use 8rib $20 each shipped
6rib $15 shipped $10 with other stuff
The ever-popular Corbeau Forza provides racers with a full competition seat at an unbeatable price. The Forza is designed to fit up to a 36-38" waist, while the Forza Wide will fit up to a 42 inch waist. Available in black, red, blue or yellow cloth OR black microsuede.
Standard features: [FONT=arial, helvetica]tubular steel frame
injection molded foam
integrated full body support
5-point harness capability
leatherette high-wear patches
Pirelli webbing
nut welded on back to secure to a seat back brace
[/FONT]
This seat is light, 17 or 19#'s forgot witch one?
The bad.
Needs to be vacuumed has some hair on it, and such. Its missing the trim for the right side lap belt hole. And it has a burn hole on the front under the corner. I didn't notice it when it was in a car, good: its a burn so not going to rip anymore. Has a melted outer ring.
$175 + shipping _________________ New Era performance
01z28, M6 NA, mullet, T tops, siqqqq |
|
Back to top |
|
 |
GTP98 Total posts: 1787 Jay1998 Grand Prix GTP Joined: 03 Oct 2003 Location: b-loooooow Age: 44 |
Posted: Wed Mar 25, 2009 12:42 pm Post subject: |
|
|
how many miles on the O2's? _________________ '08 TrailBlazer SS Black/Black |
|
Back to top |
|
 |
studderin Total posts: 6272
John Csotello1998 Grand Prix GTP Joined: 01 Oct 2003 Location: 2nd gear burnouts Age: 43 |
Posted: Wed Mar 25, 2009 8:39 pm Post subject: |
|
|
The denso one is like 200-500???? just a few months before idd8 or whenever I demoded the red car. That delco, Im not sure on, its really clean but has that red tint, so it was used with torco. not a bad thing. I didnt what to thou it out. if your gona be out this way jay you can have it.
and local guys. I wote that to put on clubgp, wer'd I'd loose 3% in paypal. And have to send 2 hrs going back on forth with PMs about a stock SC belt. If you guys will come get anything, and pay cash. your prices will be like 25%-50% less that what I listed this stuff as shipped. |
|
Back to top |
|
 |
GTP98 Total posts: 1787 Jay1998 Grand Prix GTP Joined: 03 Oct 2003 Location: b-loooooow Age: 44 |
Posted: Thu Mar 26, 2009 7:28 am Post subject: |
|
|
Ive been getting some weird O2 reading's and fluctuation idle. Plus after I installed new fuel rails last year the car's been tripping P0172, I don't know if I ripped one of the injector o-rings or if its time to replace the O2. I have the first week off in April so maybe I'll swing out and see ya when I'm off of work and grab both of them. |
|
Back to top |
|
 |
seen96 Total posts: 2033
Drag Radials Suck on FWD.1997 Grand Prix GT Joined: 01 Oct 2003 Location: elbows deep in 4t65e Age: 46 |
Posted: Thu Mar 26, 2009 9:26 am Post subject: |
|
|
Denzo O2 is good shit. I've ran race gas, E85, and seafoam by it, and it has survived...even when the seafoam killed my W.B. _________________ ZZP stuff...
Heads (started as ZZP stg.3 with some improvements)
Cam (XPZ with a slightly different components for valve movment)
IC (Ford Cobra coolant resv., frt exchr the size of a engine rad. weight consum. rear expans. tank)
"Certified Auto Trans Shop" Transmission sold by ZZP...I have no comment for this peice of...great trans.
Also,
SLP Headers <--FOR SALE
Eaton's Gen.3 M90 |
|
Back to top |
|
 |
studderin Total posts: 6272
John Csotello1998 Grand Prix GTP Joined: 01 Oct 2003 Location: 2nd gear burnouts Age: 43 |
Posted: Thu Mar 26, 2009 8:15 pm Post subject: |
|
|
ya that denso is mint, the used one is just a spare |
|
Back to top |
|
 |
studderin Total posts: 6272
John Csotello1998 Grand Prix GTP Joined: 01 Oct 2003 Location: 2nd gear burnouts Age: 43 |
|
Back to top |
|
 |
studderin Total posts: 6272
John Csotello1998 Grand Prix GTP Joined: 01 Oct 2003 Location: 2nd gear burnouts Age: 43 |
Posted: Sun May 10, 2009 11:47 am Post subject: |
|
|
any locals maybe a offer on this stuff I'll let it go cheap. shipping it sucks. Im gona toss it in a few days.
I also have a good 97-03 steel engine cradle, really nice. like 40K no wimters nice. free to a good home |
|
Back to top |
|
 |
studderin Total posts: 6272
John Csotello1998 Grand Prix GTP Joined: 01 Oct 2003 Location: 2nd gear burnouts Age: 43 |
Posted: Thu Jun 04, 2009 6:59 pm Post subject: |
|
|
trade for mighty taco!!!!!!!!!!!!!!!!!!!! |
|
Back to top |
|
 |
|