aeroforce issue

 
Post new topic   Reply to topic    Upstate New York Club Grand Prix Forum Index -> PCM / Tuning
View previous topic :: View next topic  
Author Message
monte0Offline
Cammed
Total posts: 1144

keith
1999 Other Car
Joined: 11 Jul 2005
Location: gates
Age: 45
PostPosted: Thu Aug 25, 2011 6:50 am    Post subject: aeroforce issue Reply with quote

My Aeroforce gauge died the other day after installing it in my new car. Just happened to have a extra one to test it with from a friend and ended up being a bad OBD2 cable. I've had a little trouble getting in contact with Aeroforce directly so figured I'd post it up to see if someone had an idea. Here's a couple pictures attached to show whats the issue with it I'm thinking. (I'd open my friends cable but I didn't want to damage his) Green wire doesn't seem to be ever attached.





_________________
70 Monte Carlo 12.5@109 frame off in progress...
Back to top
View user's profile 
mguzzoOffline
Top Dog
Total posts: 2863

Avatar

Michael Guzzo
1998 Grand Prix GTP
Joined: 03 Oct 2003
Location: in front of you
Age: 57
PostPosted: Thu Aug 25, 2011 12:18 pm    Post subject: Reply with quote

I see three wires, which are probably the data, power, and ground from the OBD-II connector.

I will look at mine tonight. It doesn't work either.
_________________
1998 Silvermist GTP Coupe
Bone stock unicorn
1998 True Green Metallic GTP Coupe
Pullied, cammed, intercooled. With a kiddie seat. It once ran a 13 flat.
1998 True Green Metallic GTP Sedan (retired)
Stock: 14.33 @ 96.5
PB: 13.89 @ 101 mph
Back to top
View user's profile Visit poster's website 
Strenz68Offline
Supercharged
Total posts: 416

Avatar

Jonathan
2007 Grand Prix GT
Joined: 13 Nov 2007
Location: ROC City
Age: 40
PostPosted: Thu Aug 25, 2011 3:25 pm    Post subject: Reply with quote

I can't totally tell from the pic, but this hole seems to have solder in it where others do not. Likely just needs to be re-soldered in place.

I would still wait and see what Guzzo comes up with looking at his though

Back to top
View user's profile Visit poster's website 
monte0Offline
Cammed
Total posts: 1144

keith
1999 Other Car
Joined: 11 Jul 2005
Location: gates
Age: 45
PostPosted: Thu Aug 25, 2011 6:26 pm    Post subject: Reply with quote

Yea, I saw that and I did re-solder the wire into that hole but still nothing. Checked resistance through every wire used and theirs no breaks even if you move it.
Back to top
View user's profile 
Strenz68Offline
Supercharged
Total posts: 416

Avatar

Jonathan
2007 Grand Prix GT
Joined: 13 Nov 2007
Location: ROC City
Age: 40
PostPosted: Fri Aug 26, 2011 7:44 pm    Post subject: Reply with quote

Not sure what to tell you without a wiring diagram or a working one you can open up and look at. I would if I had one to open up. GL
Back to top
View user's profile Visit poster's website 
mguzzoOffline
Top Dog
Total posts: 2863

Avatar

Michael Guzzo
1998 Grand Prix GTP
Joined: 03 Oct 2003
Location: in front of you
Age: 57
PostPosted: Fri Sep 02, 2011 9:16 pm    Post subject: Reply with quote

OK here's mine, shitty blackberry camera can't macro focus

this is looking down into the connector with the back off.

green is soldered in the first hole, white is next to it. skip one, then black. skip three then red.

under tat is empty, resistor lead, then the other end of the resistor has a white wire that comes off it. don't know where that is supposed to go.

Back to top
View user's profile Visit poster's website 
monte0Offline
Cammed
Total posts: 1144

keith
1999 Other Car
Joined: 11 Jul 2005
Location: gates
Age: 45
PostPosted: Fri Sep 02, 2011 10:13 pm    Post subject: Reply with quote

I'll have to compare it to mine when I go to work after the holiday, I left it their. Hard to tell but how many pins do you have on the plug side? I only have 3.
Back to top
View user's profile 
mguzzoOffline
Top Dog
Total posts: 2863

Avatar

Michael Guzzo
1998 Grand Prix GTP
Joined: 03 Oct 2003
Location: in front of you
Age: 57
PostPosted: Sat Sep 03, 2011 7:21 am    Post subject: Reply with quote

same here. 3 pins on the connector side.
Back to top
View user's profile Visit poster's website 
monte0Offline
Cammed
Total posts: 1144

keith
1999 Other Car
Joined: 11 Jul 2005
Location: gates
Age: 45
PostPosted: Sat Sep 03, 2011 11:58 am    Post subject: Reply with quote

ok
Back to top
View user's profile 
Display posts from previous:   
Post new topic   Reply to topic    Upstate New York Club Grand Prix Forum Index -> PCM / Tuning All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

AlbumAlbum   CalendarCalendar    FAQFAQ     SearchSearch    MemberlistMemberlist    UsergroupsUsergroups   RegisterRegister    ProfileProfile    Log in to check your private messagesLog in to check your private messages   Log inLog in 





Contact Administrator

Powered by phpBB © 2001, 2005 phpBB Group