looking for intercooler

Posted: Sun Jan 08, 2006 1:22 pm Post subject: looking for intercooler

I'm looking to build a zzp stage 2 intercooler system on a budget. So anyone switching to a turbo setup and needs to sell any intercooler parts or if you know anyone selling one lemme know... thx
_________________
2004 Yukon XL Trying to keep stock
2000 gtp Custom I/C, TOGs, Custom PCM, 3.25'', HAI, VS cam Retired

Posted: Sun Jan 08, 2006 2:51 pm Post subject:

My buddy that has ALOT of connections with machine shops ect. ~might~ try making a core for my car. If all goes well...I'l sell my core for $500.

If ur not in a hurry, keep this in mind. He hasnt got to it yet but, if ur still in the market PM me later.
_________________
ZZP stuff...
Heads (started as ZZP stg.3 with some improvements)
Cam (XPZ with a slightly different components for valve movment)
IC (Ford Cobra coolant resv., frt exchr the size of a engine rad. weight consum. rear expans. tank)
"Certified Auto Trans Shop" Transmission sold by ZZP...I have no comment for this peice of...great trans. Wink

Also,
SLP Headers <--FOR SALE
Eaton's Gen.3 M90

Posted: Sun Jan 08, 2006 5:39 pm Post subject:

never thought of that before... if anyone has a blueprint for the 2 sandwich pieces, my buddy tom at napa works in the machine shop on wherle. I could c how much it'd cost. Not sure if they have a CNC though, but i'll check.

Posted: Mon Jan 09, 2006 4:45 pm Post subject:

where can i find the specs?
_________________
DubC Performance

Posted: Mon Jan 09, 2006 4:56 pm Post subject:

anyone think they can blue print one of there own?

Posted: Mon Jan 09, 2006 5:42 pm Post subject:

I can
_________________
New Era performance

01z28, M6 NA, mullet, T tops, siqqqq

Posted: Mon Jan 09, 2006 6:20 pm Post subject:

I'll be able to make the cheap.. I think

Posted: Mon Jan 09, 2006 6:23 pm Post subject:

im a cad master. but sence my core is still on the car I dont have access to draw up prints.
_________________
'08 TrailBlazer SS Black/Black

Posted: Mon Jan 09, 2006 6:25 pm Post subject:

I looked into this, unless you get the alum for free, it's not gona be cheaper.

Posted: Mon Jan 09, 2006 6:28 pm Post subject:

how much would the alum run? cuz we have ppl that can make the part in cad and i can draw out the cuts that the CNC reads. so only thing that'd cost would b the cnc time and the alum. But i might b able to get cnc time for cheap.

Posted: Mon Jan 09, 2006 6:38 pm Post subject:

If I had the specs, I know I could get one made for free, if I put it on my own car.

My friend made my under S/C alky plate.
Can't be too much different.
_________________
Good Bye.
BHO sucks.

Posted: Tue Jan 10, 2006 8:22 am Post subject:

depending on what you want to do, why not SSIC?
whole kit is $550, good to take you down to a 3.2 or even 3.0 with other mods.
_________________
1998 Silvermist GTP Coupe
Bone stock unicorn
1998 True Green Metallic GTP Coupe
Pullied, cammed, intercooled. With a kiddie seat. It once ran a 13 flat.
1998 True Green Metallic GTP Sedan (retired)
Stock: 14.33 @ 96.5
PB: 13.89 @ 101 mph

Posted: Tue Jan 10, 2006 1:47 pm Post subject:

I have an SSIC core i'd be willing to part with Smile

_________________
Hi, I'm Matt.

I'm the resident smartass and I have fourblack children: (ok, one's only half black..)
07.5 2500HD, Duramax, Edge Race Evo CTS, MBRP 5" Stainless, TransGo, Sleeves, EGR!, PCV
09 VRSCDX - Night Rod. Flat black, gloss black
02 Black Z06. All work done by New Era Perforamnce. 519/497 at the rear, 3100 lbs.
05 Arctic Cat Firecat F7 - Sold
07 Arctic Cat F8 Sno Pro - Smashed into 1000 orange pieces.

Posted: Tue Jan 10, 2006 2:51 pm Post subject:

or use this as a starting point.
it's Gen V, for Gen III you need to move the inlet 1" toward the snout

http://homepage.mac.com/mguzzo/GenVIC.igs

Posted: Tue Jan 10, 2006 4:36 pm Post subject:

how did the ilcgp guys get there kits so cheap??
_________________
MODS: Stock

	Upstate New York Club Grand Prix Forum Index -> Classifieds	All times are GMT - 5 Hours Goto page 1, 2 Next
Page 1 of 2