WTB wire harness

Posted: Sat May 13, 2006 11:36 pm Post subject: WTB wire harness

Anyone have a wire harness for the GM I/C pump or know what vehicle i could get it out of at a junkyard?
_________________
2004 Yukon XL Trying to keep stock
2000 gtp Custom I/C, TOGs, Custom PCM, 3.25'', HAI, VS cam Retired

Posted: Sun May 14, 2006 5:36 am Post subject:

i have it but its connected to my pump(its forsale) lol but i dont think anything is similar at least that i have seen
_________________
97 GTP : dhp/msp intake/NIC cam/Slp headers/full exhaust/F1 hood

Posted: Sun May 14, 2006 12:19 pm Post subject:

its a fule injector conntor. I cut mine off a 3.1L corrsaca at a jyard. And NAPA has the terminal ends to rewire the connector. The stock wires you cut off the harness will be likw 22 ga. reallly small. So redo it with a relay, and use thincker 18ish ga wires.

get the ke on power soure from a pink wire on the backside of the under hood fuse block. Most of them are key on power source. That will trip the relay.

<--- John C
_________________
Hi, I'm Matt.

I'm the resident smartass and I have fourblack children: (ok, one's only half black..)
07.5 2500HD, Duramax, Edge Race Evo CTS, MBRP 5" Stainless, TransGo, Sleeves, EGR!, PCV
09 VRSCDX - Night Rod. Flat black, gloss black
02 Black Z06. All work done by New Era Perforamnce. 519/497 at the rear, 3100 lbs.
05 Arctic Cat Firecat F7 - Sold
07 Arctic Cat F8 Sno Pro - Smashed into 1000 orange pieces.

Posted: Sun May 14, 2006 2:40 pm Post subject:

is it a injector? it looked a lil bigger....

Posted: Sun May 14, 2006 2:42 pm Post subject:

thx, i'll try that

Posted: Sun May 14, 2006 10:02 pm Post subject:

yup look

http://www.zzperformance.com/products_img/425_4.jpg
_________________
New Era performance

01z28, M6 NA, mullet, T tops, siqqqq

	Upstate New York Club Grand Prix Forum Index -> Classifieds	All times are GMT - 5 Hours
Page 1 of 1