| View previous topic :: View next topic |
| Author |
Message |
KC2GIW Total posts: 5563
Matt Antonio1998 Grand Prix GTX Joined: 11 Jun 2004 Location: SYR/ROC Age: 24 |
 Posted: Mon Aug 21, 2006 2:03 pm Post subject: |
 |
|
You can drive it without a case learn, and anyone with a powertuner can do it. it takes 4 seconds
_________________
Hi, I'm Matt. I'm the resident smartass and I have fourblack children: (ok, one's only half black..)
07.5 2500HD, Duramax, Edge Race Evo CTS, MBRP 5" Stainless, TransGo, Sleeves, EGR!, PCV
09 VRSCDX - Night Rod. Flat black, gloss black
02 Black Z06. All work done by New Era Perforamnce. 519/497 at the rear, 3100 lbs.
05 Arctic Cat Firecat F7 - Sold
07 Arctic Cat F8 Sno Pro - Smashed into 1000 orange pieces. |
|
| Back to top |
|
 |
| Mike H Total posts: 4243
Joined: 01 Oct 2003 Location: Roch, NY |
| Posted: Mon Aug 21, 2006 4:38 pm Post subject: |
|
|
Search the forums for "crankcase variation " something or other. They do not need to flash the pcm to do it.
Of course if you had a 97 it would be irrelevant.  |
|
| Back to top |
|
|
| Larry Total posts: 2201
Larry H.2001 Grand Prix GTP Joined: 01 Oct 2003 Location: Rochester, NY Age: 47 |
| Posted: Tue Aug 22, 2006 8:37 pm Post subject: |
|
|
| creeping_gtp wrote: | | Also, I see that people go to the dealer and get the learn done. I called to make the apt. and I asked them to make sure they did not flash the PCM and they said, "thats the only way". |
Unfortunately, most dealers do not understand what the CASE learn is and some of them are not interested in understanding it or helping anyone out. And they will charge a full hour of labor just to plug in the Tech II to do the case learn. Some service departments might tell you on the phone they know what it is and they still don't actually know.
Unless you know a shop that understands what the case learn is and will not charge too much just wait for a club meet that you can attend. Folks with a PowrTuner (there's a couple in Rochester) can do a case learn for you. |
|
| Back to top |
|
|
| creeping_gtp Total posts: 41
mike2002 Grand Prix GTP Joined: 21 Aug 2006 Location: Syracuse |
| Posted: Mon Aug 28, 2006 9:20 pm Post subject: |
|
|
I finally went to Bill Rapp and talked ot the service manager. He spoke to one of the techs, and he did it for me.
It was that freaking quick. and only 40.00 bucks.
Car runs great and I also added a 3.4 pulley over the weekend.
_________________
2002 GTP
U-Bend delete
DHP PCM
FWI wrapped
3.4 pulley upgrade
 |
|
| Back to top |
|
|
|
Album
Calendar
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages 
Log in