4/25 Mod Day...Who's bringing what?

Posted: Mon Apr 05, 2004 5:07 pm Post subject:

Problem is we meet the the exit, then go to Delta Sonic and sit around, blah blah....lesson is to wash your car first so we don't have to keep stopping!

I vote for meeting at Eastern Hills off Transit in front of Sears.
Get off the Thruway, left on Transit, cross Main St, and pull into the mall on the right.
_________________
1998 Silvermist GTP Coupe
Bone stock unicorn
1998 True Green Metallic GTP Coupe
Pullied, cammed, intercooled. With a kiddie seat. It once ran a 13 flat.
1998 True Green Metallic GTP Sedan (retired)
Stock: 14.33 @ 96.5
PB: 13.89 @ 101 mph

Posted: Mon Apr 05, 2004 6:10 pm Post subject:

Posted: Tue Apr 06, 2004 11:05 am Post subject:

Posted: Tue Apr 06, 2004 12:02 pm Post subject:

And us Syr members will meet you guys at Lowes, since last time we tried meeting off the exit we got yelled at and told to leave. So we'll be to Lowes around 8am!

Posted: Tue Apr 06, 2004 12:38 pm Post subject:

When we get closer to mod day, we can agree on where to meet and I'll make sure that there is a detailed map on how to get to the warehouse and also list member's phone numbers.

Posted: Wed Apr 07, 2004 9:04 am Post subject:

I'm going to vote for leaving from Lowes, and meeting at the parking lot after the toll booths in buffalo.

Posted: Sat Apr 17, 2004 7:44 pm Post subject:

I should be attending this meet and I need to replace my lower intake manifold gasket because it is leaking coolant. I am buying the set which includes the upper and lower. If anyone has done this before and can help me it would be much appreciated.
_________________
~Autumn Marie~

Posted: Sat Apr 17, 2004 7:52 pm Post subject:

It's not that hard.....it's not much more work than replacing rockers. I can help out after I am done replacing my caliper, and i am sure there are people that will be able to lend a hand.

Posted: Sat Apr 17, 2004 9:25 pm Post subject:

is anyone bringing service manuals? For 1998? I need to look up P1133 diagnostic chart.

Posted: Sun Apr 18, 2004 8:20 am Post subject:

I'll bring my 1998 Helms Manuals.

Posted: Sun Apr 18, 2004 10:50 am Post subject:

I cna bring my laptop with the GM service manuals on them......
_________________
Mike Gorzynski

Posted: Sun Apr 18, 2004 8:19 pm Post subject:

Is there anyway someone can bring a breaker bar? I tried to swap out my trailing arms the other day and could not break that huge bolt loose.
Thanks,
-Sean

Posted: Sun Apr 18, 2004 8:38 pm Post subject:

Posted: Sun Apr 18, 2004 8:43 pm Post subject:

IIRC that is an 18 or 19mm socket. I will also grab my 1/2" breaker bar......plus i'll have my air tools, so if we can get that nut off with the breaker bar we'll go at it with the impact wrench and bust that bitch off!

	Upstate New York Club Grand Prix Forum Index -> Club Events	All times are GMT - 5 Hours Goto page Previous 1, 2, 3, 4, 5, 6, 7 Next
Page 5 of 7