IDD 9 tools, supplys list

Posted: Fri Feb 23, 2007 1:04 am Post subject: IDD 9 tools, supplys list

Because we have a lot of faster cars now, and it's 360 (rochester) miles away. People are detoured about going with fear of breaking down. But this shouldn't be a consern as much I people think. Once you get there and 50-100miles out your only a cell phone call and a few hours down, and you can fix just about anything Cool

IDD 8 I kid form MI I think broke his input shaft at the track. His car went in Matt M's tailor. Matt ran a 9.01 that parked in the pits for about 30mins. (Track closes at 5-6pm and we have to be out) Steve Miller (bumpinGTP) drove matts truck and trailer with the broke car to the hotel. Matt drove his TTGT back the the hotel (wheelbars up) On the way did the loudest/longest GP rolling burnout I've seen Laughing

Kid called his friend right after his car broke, who get a trailor. And get the the hotel around 1pm while were all drunk, and push his car on the new trailor. I don't think anyone remeber the kids name? Point is, every is a GP guy and helps you. Ed Morad brings his truck and trailor of part people bought, and he know want space people will be buying Wink

good used trans, stock L67 stock L32, diffs, axles. wheel bearings, fuel pumps.... And there 30 other people that have spare belts,plugs, wires. And there should be a clubGP guys that live withing a hour of the track you can get someone to trailer your car. And rent a trialior and pick it up the next day/weekend. Or ZZP is I think 3-4 hours north.

So this thread is to list what parts tool people will be bringing. I'm gona go, not sure if Ill bring a car or not yet? So I'll have these parts to bring with use any way.

1 set New in box NAPA maxdrive 4t65 hd axles. (never installed, just warrenty replacements I got.. they are not as strong as GM but you can drive normal on them)

1 set of Cardone/A1 rebuilt GM 4t65 HD axles (both have had the inner boots off with grease loss, but will get you home. I dont care about them if they get rain whatever)

stock HD diff (I should have enoght parts to assemble one, to be ready to just switch)
stock non HD diff. (same

wire? I have some used sets I can grab
plugs? we will have spares
I have a lot of 6 rib and 8 belts.

PS pump, I have a spare

starter I dont have

alt 97-99 dont have
alt 99+ dont have

extra trans: hummmm ya? I dont have? change in a parking lot?? (hopefully there a car trailing that can be street driven)
spare shortblock (same)

Spare tires? I dont have a spare, but normally drive on streets, and bring slicks. We can see if there will be 1-2 spare stock sized tires (DR) not going on a car to drive back on.

tools: no car I wount bring any but anyone is welcome to borrow anything for them selfs

fuilds : same^^
_________________
New Era performance

01z28, M6 NA, mullet, T tops, siqqqq

Posted: Fri Feb 23, 2007 11:04 am Post subject:

Ok i will consider it John Laughing

_________________
1998 GrandPrix GT
Stock 1/4 Mile - 15.8
PB NA 1/4 Mile - 13.636@100mph Naturally Aspirated - 1.99 60' blah!
PB Turbo 1/4 Mile - 12.5 @ 114mph with a 2.0 60 ft. letting off 2 times down the track

A special thanks to ZZP, Stattama, and the UNYCGP for my accomplishments!

Posted: Fri Feb 23, 2007 2:27 pm Post subject:

Jon...if you get a trailer, I MIGHT be bribed to tow a car....I've never been to IDD...and I wouldnt mind goin'. If you pay for gas, you can ride with me in the blue beast
_________________
Hi, I'm Matt.

I'm the resident smartass and I have fourblack children: (ok, one's only half black..)
07.5 2500HD, Duramax, Edge Race Evo CTS, MBRP 5" Stainless, TransGo, Sleeves, EGR!, PCV
09 VRSCDX - Night Rod. Flat black, gloss black
02 Black Z06. All work done by New Era Perforamnce. 519/497 at the rear, 3100 lbs.
05 Arctic Cat Firecat F7 - Sold
07 Arctic Cat F8 Sno Pro - Smashed into 1000 orange pieces.

Posted: Fri Feb 23, 2007 2:52 pm Post subject:

hmm. Ok Matt. Thanks for the offer. I will def think about that and look for a trailer.

Jon

Posted: Tue Feb 27, 2007 7:47 pm Post subject:

I'll probably bring my toolbox, wires, fluids. maybe a spare belt.
i have to make a list of mods to finish before then

> new fuel filter and pump
> tranny fluid change
> fix the rust on the gas filler door
> time betwen now and then to install SSIC? I need help/.
_________________
1998 Silvermist GTP Coupe
Bone stock unicorn
1998 True Green Metallic GTP Coupe
Pullied, cammed, intercooled. With a kiddie seat. It once ran a 13 flat.
1998 True Green Metallic GTP Sedan (retired)
Stock: 14.33 @ 96.5
PB: 13.89 @ 101 mph

	Upstate New York Club Grand Prix Forum Index -> Club Events	All times are GMT - 5 Hours
Page 1 of 1