trade ?

Posted: Wed Mar 19, 2008 1:54 am Post subject: trade ?

i want to put my car back to stock because of all the problems i'm having with it. i want to trade my 3" zzp bolt in dp for a stock 04+ dp and also i have a front plog . i am willing to trade this for a set of ported front and rear mani's

also have a 3.5 press on pully . make an offer

i do have the o2 extension plug for any 04 +gp's

Posted: Wed Mar 19, 2008 10:09 am Post subject:

idk if 03 exhaust would fit 04+ gps but im selling my full stock exhaust with hangers attached and it has the 04+ mufflers on it and also i am selling my stock manifolds as well..

Posted: Wed Mar 19, 2008 1:11 pm Post subject:

97-03 and 04+ 3800 catbacks and manifolds are fully interchangeable. Only differences are a couple bolt holes (for extraneous heatshields IIRC) in the mani's and one hanger near the second turn in the catback. Downpipes are different, but I imagine could be swapped also.

I'd be surprised if there still weren't some ported manifolds floating around here.
_________________
2018 Acadia
Retired: 2014 ATS, 2004 GTP

Posted: Wed Mar 19, 2008 3:56 pm Post subject:

i don't need a full exhaust i just really need a down pipe for 04+. i will sell the plog for a good offer. oh and these only have like 5000 miles on them

Posted: Wed Mar 19, 2008 4:22 pm Post subject:

I have my stock downpipe from my GTP at my house in Syracuse and I'm going home this weekend. Are you saying that will fit his car Brian? Let me know if you want it and we could possibly do a trade plus cash on the P-log. Can I get some info on that?
_________________

Posted: Wed Mar 19, 2008 6:08 pm Post subject:

Is the DP catless (assume stainless)? Either way I still have my stock 04 in my garage and I'll trade.

I also have the manifolds. I have ported on the car.

I'm intrested in a PLOG, is it the stainless version?

I'm going on a trip so if you wanted the front ported that would have to wait until I return.

How's "front ported/stock downpipe/cash" for your "PLOG/ZZP downpipe" sound?
_________________
Best Formula N-A 12.1 @ 110 (pre-engine swap)

Posted: Thu Mar 20, 2008 9:52 am Post subject:

as long as your dp doesn't have the u bend . it sounds like a deal.. the plog is ceramic coated and the dp is a 3" mild steel . how long before your back because i really need to get this car in the shop?

Posted: Thu Mar 20, 2008 10:43 am Post subject:

Let me know if you guys don't figure something out, I'm looking for a powerlog.

Posted: Thu Mar 20, 2008 12:53 pm Post subject:

Posted: Thu Mar 20, 2008 1:17 pm Post subject:

Yeah no u-bend, my stuff was all on/for a previous generation grand prix, and the stock downpipe's for 04+ don't have a u-bend in them. Is mild steel "stainless"?

I'm coming back the 31st or the 1st.

Posted: Sat Mar 22, 2008 5:29 pm Post subject:

alright well have to get together when you come back..

Posted: Sat Mar 22, 2008 5:46 pm Post subject:

I'm interested in the 3.5"pulley. Did you get it new?
_________________

Fat Bottom Girls

2005 GTP. K&N FIPK, RT catted DP, DHP PCM, 180 Tstat, Plog, cc xover. Coming soon AL104s, MPS.

Posted: Sat Mar 22, 2008 6:00 pm Post subject:

yeah its brand new . never been installed. i might keep this one because it looks like the stock one

Posted: Sun Mar 23, 2008 9:53 am Post subject:

well my buddy mike is going to be getting the plog now .sorry but i still need the down pipe

Posted: Sat Mar 29, 2008 9:44 pm Post subject:

had a look at my stock downpipe, sorry to say the flange on the right side has seen better days, when it was removed the torching didn't do it any favors and the hole is in rough shape. Didn't notice it before. Looks like I'll just use that for catalytic recycling Razz

How my 04 had so many leaves cramed in and such a rusty exhaust I will never know...oh wait Buffalo...

	Upstate New York Club Grand Prix Forum Index -> Classifieds	All times are GMT - 5 Hours
Page 1 of 1