(W-PICs) HOOSIER QUICK TIME PROS ON HI.POS.

Last edited by Doug on Sat Jul 18, 2009 6:04 pm; edited 1 time in total

2 Hoosier Quick Time Pros mounted on High Polish torque stars. Drilled for #10 Screws for rim locks, but not installed. Tires have about 15-20 burn outs on them. Rims have some curb rash, but still look good at over 100 mph Laughing

At 18-20 pounds of air pressure, they dont spin on the rim without the screws, less pressure and they will spin in the rim. With screws I have run down to 12-14 lbs. Best 60' in the 1.6 second range w/screws
Asking $300 Pics of tread area show the round wear guage holes, those are how you tell when tire is near end of life, not the 2 grooves. Lots of use left in these.

[/img]

Posted: Tue Jul 14, 2009 5:14 pm Post subject:

These are the 26 x 9.50 x 16's, right?

Any pics of the depth left in the 2 tread lines, and how you did the bead screws?

I was suggesting some 15" QTP's for Sam to mount on my Montana 5-stars for his Regal, but this may be an easier solution to get it back to the track sooner. (Johnny says they're lighter than the M/T's we were looking at... Laughing

)

- Dave
_________________
2004 Regal GSX - YouTube channel Stattama T67BB, A2W IC, ST5, heads, L32, GMR diff/chain (11.46 w/ Z7 T66, IS3t cam)
2006 Grand Prix GXP - K&N intake and mufflers only, basically stock for me
2012 F-150 EcoBoost SuperCrew 4x4 - stock DD and roadtrip vehicle
1998 Daytona GTP #838 - I/C*d MP112 L26 - Rust in Peace, engine saved

Posted: Wed Jul 15, 2009 8:25 am Post subject:

Yes, they are the 26" x 9.5" x 16". I put this set of tires on last year after wearing out my first pair. The first pair I used the screws to lock the tires to rim, just as Big Jeff was doing at the time. This time I tryed them with out the screws and was happy with the luanches at 18lbs or a little less. I will have to get them out of storage and get a picture for you if you need.
These also have the black Pontiac center caps on them, I know I know, all that extra weight!!

Posted: Wed Jul 15, 2009 8:55 am Post subject:

dave you should get theses
I may go to the syc nats this weekend?
_________________
New Era performance

01z28, M6 NA, mullet, T tops, siqqqq

Posted: Wed Jul 15, 2009 10:53 am Post subject:

if i could get a picture i may purchase them from you cuz i need them badly... traction is non existant in my car
_________________
2001 Grand Prix GTP - Intake, Borla Catback, Tune
2004 Regal GSX - Turbo, I/C 11.46 @ 122.8mph
http://www.youtube.com/watch?v=j5IqjNkscds

Posted: Sat Jul 18, 2009 6:12 pm Post subject:

TTT now with pictures as requested

Posted: Sat Jul 18, 2009 10:49 pm Post subject:

pm sent

Posted: Sat Jul 25, 2009 1:54 am Post subject:

SOLD!

Posted: Sat Jul 25, 2009 7:41 am Post subject:

Those are bald, they would never get me through the winter.
_________________
Good Bye.
BHO sucks.

Posted: Sat Jul 25, 2009 8:17 am Post subject:

Posted: Sat Jul 25, 2009 8:21 am Post subject:

	Upstate New York Club Grand Prix Forum Index -> Classifieds	All times are GMT - 5 Hours
Page 1 of 1