| View previous topic :: View next topic |
| Author |
Message |
NY GTP Total posts: 967
Rich Boddy1997 Grand Prix GTP Joined: 28 Feb 2005 Location: Rochester NY Age: 42 |
 Posted: Tue Aug 18, 2009 10:09 am Post subject: |
 |
|
He got the PRNDL selector switch that sits on the tranny somewhere, which apparently also has the neutral safety switch in it from what we read. I thought that neutral switch was in the shifter console though.
_________________
2000 NBM Z28 | SLP lid | Ebay LT's w/ TSP ORY | Magnaflow catback | New Era tune | Pro 5.0 | Monster Stage2 and Tick master | BMR springs/Bilstein HD's | Spohn Adj. LCA/Panhard | Fast Toys ram-air | !EGR, !AIR
12.87 @ 110 - 1.97 60'''' - 336whp/352wtq
 |
|
| Back to top |
|
 |
| Black98GT Total posts: 284
Steve Boddy1998 Grand Prix GT Joined: 06 Dec 2007 Location: Rochester Age: 37 |
|
| Back to top |
|
|
| usmcz28 Total posts: 1444
Rick2001 Grand Prix GTP Joined: 08 Apr 2008 Location: Rochester/Irondequoit |
| Posted: Tue Aug 18, 2009 8:52 pm Post subject: |
|
|
| That would be it, if you want to swing by i'd help ya after the car cooled. I have a front hub and axle shaft to swap out on an Impala Saturday as well all pending on if my little bastard decides to come sooner rather than later. DAMN KIDS! |
|
| Back to top |
|
|
| Belo Total posts: 577
Brandon Emerson1998 Grand Prix GTP Joined: 17 Aug 2006 Location: Buffalo Age: 41 |
| Posted: Wed Aug 19, 2009 9:01 am Post subject: |
|
|
| NY GTP wrote: | | He got the PRNDL selector switch that sits on the tranny somewhere, which apparently also has the neutral safety switch in it from what we read. I thought that neutral switch was in the shifter console though. |
It's an easy install. It's under the throttle body. It was easiest for me to get at it by removing my thrasher cai.
this was helpful for me:
http://www.automotivehelper.com/topic923992.htm
Make sure you keep the arm in neutral, or put it back in neutral if you move it.
edit: it does take a bit of weird arm positioning, scraped knuckles etc. But otherwise, it's not so bad.
_________________
 |
|
| Back to top |
|
|
| Black98GT Total posts: 284
Steve Boddy1998 Grand Prix GT Joined: 06 Dec 2007 Location: Rochester Age: 37 |
| Posted: Wed Aug 19, 2009 2:48 pm Post subject: |
|
|
| Belo wrote: | | NY GTP wrote: | | He got the PRNDL selector switch that sits on the tranny somewhere, which apparently also has the neutral safety switch in it from what we read. I thought that neutral switch was in the shifter console though. |
It's an easy install. It's under the throttle body. It was easiest for me to get at it by removing my thrasher cai.
this was helpful for me:
http://www.automotivehelper.com/topic923992.htm
Make sure you keep the arm in neutral, or put it back in neutral if you move it.
edit: it does take a bit of weird arm positioning, scraped knuckles etc. But otherwise, it's not so bad. |
The only thing that kept me from doin it the other day was my tranny being so hot.
Rick, PM me yer address and what time you want me to come out on sat and ill buy you some beer for helpin me. |
|
| Back to top |
|
|
| Black98GT Total posts: 284
Steve Boddy1998 Grand Prix GT Joined: 06 Dec 2007 Location: Rochester Age: 37 |
| Posted: Sat Aug 29, 2009 9:07 am Post subject: |
|
|
| Well... I put the new Neutral Safety Switch in this morning. And well, thats not the problem why my trunk wont open. |
|
| Back to top |
|
|
| usmcz28 Total posts: 1444
Rick2001 Grand Prix GTP Joined: 08 Apr 2008 Location: Rochester/Irondequoit |
| Posted: Sat Aug 29, 2009 12:01 pm Post subject: |
|
|
| It could be the actuator in the trunk they can get all gooped up after a while. |
|
| Back to top |
|
|
| Black98GT Total posts: 284
Steve Boddy1998 Grand Prix GT Joined: 06 Dec 2007 Location: Rochester Age: 37 |
| Posted: Sat Aug 29, 2009 1:38 pm Post subject: |
|
|
| Installed a new one today when I did the neutral switch. |
|
| Back to top |
|
|
| usmcz28 Total posts: 1444
Rick2001 Grand Prix GTP Joined: 08 Apr 2008 Location: Rochester/Irondequoit |
| Posted: Sat Aug 29, 2009 4:08 pm Post subject: |
|
|
god hates your car then!
BCM possibly? |
|
| Back to top |
|
|
| Black98GT Total posts: 284
Steve Boddy1998 Grand Prix GT Joined: 06 Dec 2007 Location: Rochester Age: 37 |
| Posted: Sat Aug 29, 2009 6:45 pm Post subject: |
|
|
| usmcz28 wrote: | god hates your car then!
BCM possibly? |
Thats what im thinkin, cause when i hit the trunk button on my keyring the bcm just clicks. |
|
| Back to top |
|
|
| usmcz28 Total posts: 1444
Rick2001 Grand Prix GTP Joined: 08 Apr 2008 Location: Rochester/Irondequoit |
| Posted: Sat Aug 29, 2009 8:32 pm Post subject: |
|
|
| Its up under the drivers side kick panel, |
|
| Back to top |
|
|
| Black98GT Total posts: 284
Steve Boddy1998 Grand Prix GT Joined: 06 Dec 2007 Location: Rochester Age: 37 |
| Posted: Sat Aug 29, 2009 8:55 pm Post subject: |
|
|
| Ya, I knew where it was. I heard that you have to get one that has the same serial number on it or it wont work. |
|
| Back to top |
|
|
| usmcz28 Total posts: 1444
Rick2001 Grand Prix GTP Joined: 08 Apr 2008 Location: Rochester/Irondequoit |
| Posted: Sat Aug 29, 2009 9:01 pm Post subject: |
|
|
| it's true. pull it out and then try Morads |
|
| Back to top |
|
|
| Black98GT Total posts: 284
Steve Boddy1998 Grand Prix GT Joined: 06 Dec 2007 Location: Rochester Age: 37 |
| Posted: Sun Aug 30, 2009 12:30 pm Post subject: |
|
|
| Found one on ebay for 45 bucks, Morad didnt have any. |
|
| Back to top |
|
|
| usmcz28 Total posts: 1444
Rick2001 Grand Prix GTP Joined: 08 Apr 2008 Location: Rochester/Irondequoit |
| Posted: Sun Aug 30, 2009 2:15 pm Post subject: |
|
|
| did you pull yours and check the number on it to the one on ebay? |
|
| Back to top |
|
|
|
Album
Calendar
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages 
Log in