Dyno day participants.....

Posted: Wed Jun 08, 2005 9:16 am Post subject:

Hey guys. It looks like we're going to have an excellent turnout. Smile

Is everyone just taking pulls, or do some of you have software/hardware to tune maps and flash your PCMs? If so, I need to know how many.

My dyno is capable of running bikes, but I haven't had anyone come down to do it yet. That's something I would do on another day when we have a bunch of time to try different mounting techniques.

-Mike

edit: Someone asked for confirmation of the time/place. It is 10AM til we're done (within reason) on Sunday, June 12th. Doing 3 pulls on a dozen cars in one day is no problem at all.

Posted: Wed Jun 08, 2005 9:28 am Post subject:

Posted: Wed Jun 08, 2005 9:29 am Post subject:

Mike, what other kind of work so you do? Specifically, do you do custom exhaust work?
_________________
1998 Silvermist GTP Coupe
Bone stock unicorn
1998 True Green Metallic GTP Coupe
Pullied, cammed, intercooled. With a kiddie seat. It once ran a 13 flat.
1998 True Green Metallic GTP Sedan (retired)
Stock: 14.33 @ 96.5
PB: 13.89 @ 101 mph

Posted: Wed Jun 08, 2005 9:40 am Post subject:

Posted: Wed Jun 08, 2005 9:43 am Post subject:

Posted: Wed Jun 08, 2005 10:12 am Post subject:

OK. Just to be clear, the rate for time on the dyno and the 3 pull special are two different things. If you're taking three pulls to get a solid number, the rates are posted (50 without o2 and 55 with sniffer). As mentioned, you guys will get 10% off those prices for this dyno day.

If you're doing any tuning this takes time between the pulls and you will be charged by the time used on the dyno including loading/strapping/attaching sensors/removal. I only charge to the minute. I do not round up to the next hour as many shops do.

For those being charged by time my REGULAR rates are:
100 - 1st hour
75 - 2nd hour
50 - 3rd hour and beyond

For this dyno day I will start you at the 2nd hour rate of $75 instead of $100.

Those who want their cars tuned will be scheduled at the end of the day to make sure everyone who only wants pulls gets their car done. Then we'll run those who want tuning.

-Mike

Posted: Wed Jun 08, 2005 6:19 pm Post subject:

I got my Mini AFC but was hoping a fellow club member could help me out with a tune job also.
_________________
Thrasher CAI, ZZP SR Rockers, GTHV TB, HVII, ZZP WP Underdrive Pulley, 180*stat, DHP PCM 1.0 w/Perf Shift, PEM''s, JimmyC DP V2.5, Gen 2 Poly Mounts, GM STB''s, GTX Tips, Hawk HPS Pads, VT Grills, Silver Reverse Gauges, DIC Upgrade, GTP Shift Knob, F-body Brake Upgrade w/ Slotted and Drilled all the way around.

Posted: Thu Jun 09, 2005 8:13 am Post subject:

Dyno Participants:
1.) John C
2.) Gary
3.) Matt (lame)
4.) Rich S
5.) Jason Mertz
6.) Clint Lopez
7.) Jay G
8.) David
9.) Jason B
10.) Jim Chetney
11.)
12.)
13.)
14.)
15.)

Dyno viewing:
1.) Scott M
2.) Brian R
3.) Sean H
4.) Mike Gorzynski
5.) Pat S
6.) Mike H. - weather dependent
7.) Mike G for a little bit
8.) Carl F.
9.) Shawn
10.) Larry H.
11.)
12.)
13.)

Posted: Thu Jun 09, 2005 9:54 am Post subject:

I needed directions so I located Innovative Tuning, here's a map if anyone else needs it.

Edited by MSG to remove incorrect map.

Posted: Thu Jun 09, 2005 10:52 am Post subject:

Posted: Thu Jun 09, 2005 11:17 am Post subject:

Isn't Oddy's shop down the street there? (Bullis Rd)

Posted: Thu Jun 09, 2005 11:26 am Post subject:

Posted: Thu Jun 09, 2005 12:03 pm Post subject:

Sorry about that, I didn't intend to confuse anyone, that's what bigyellow.com had showed me. Thanks for correcting me or I would have gone to the wrong place! Embarassed

Mike if you'd care to pursue it:

http://yellowpages.superpages.com/listings.jsp?SRC=&STYPE=S&PG=L&R=N&L=&C=&N=Innovative%20Tuning&T=&S=&search=Find+It

Click on map, that's where I got the map I posted Confused

	Upstate New York Club Grand Prix Forum Index -> Club Events	All times are GMT - 5 Hours Goto page Previous 1, 2, 3, 4, 5 Next
Page 4 of 5